Discussion:
Fan Blowout Mode Intermittent
Add Reply
David Turner
2021-09-06 18:39:00 UTC
Reply
Permalink
ILO FAN_BLOWOUT_ENTER 01 Jan 2001 00:09:33 Fans are entering blowout
mode. ASCII message - PROC 0,
6980235B00E10001 00003020434F5250

Anyone seen this before. Intermittent blowout. Temp was 42C so within
range - 78C is the caution temp

Changed out one fan that might have been a wee problem but nothing changed

Latest firmware 52.0 - Latest f/w/ on power supplies etc

Checked CPU socket - CPU seems OK even thought it is suggesting Proc 0
might be problematic

Tried it with a completely different CPU with different VRM. Same thing.


Anyone?


David
Shael Richmond
2021-09-08 15:36:30 UTC
Reply
Permalink
ILO FAN_BLOWOUT_ENTER 01 Jan 2001 00:09:33 Fans are entering blowout mode. ASCII message - PROC 0,
6980235B00E10001 00003020434F5250
Anyone seen this before. Intermittent blowout. Temp was 42C so within range - 78C is the caution temp
Changed out one fan that might have been a wee problem but nothing changed
Latest firmware 52.0 - Latest f/w/ on power supplies etc
Checked CPU socket - CPU seems OK even thought it is suggesting Proc 0 might be problematic
Tried it with a completely different CPU with different VRM. Same thing.
Anyone?
David
I am having this same error! HPE is suggesting reseating/replacing the System Insight Display. The fan is still running at high speed and drawing a lot more power. They were thinking it is a bad sensor.

Shael Richmond
International Paper

Loading...